Guangzhou Zhengqili Trade Co.,Ltd



Home > Knowledge > Content

Safety maintenance of cutting machine

Edit:Guangzhou Zhengqili Trade Co.,LtdUpDate:Apr 04, 2018

1. Place the equipment on the horizontal ground before operation to ensure the machine is stable and reliable; Make sure the device plug is in good contact, no loose, no trace;

2. Check whether there is any foreign material in the rotating cylinder or the conveyor belt. If there is any foreign body, it must be cleaned, so as not to cause damage to the tool.

3, operation, adjustment according to the processing of vegetables select cutting mode, centrifugal slicing machine used for cutting the melon potato hard food, vertical knife some leafy soft dish or cut pieces can be processed into different specifications of the shapes of block, ding, diamond;

4, install vertical knife, first turn the adjustable eccentric, makes the tool post to the bottom dead center, to make the tool post up 1-2 mm, make the vertical knife after contact with the conveyor belt, fastening nut vertical knife fastened on the tool carrier. If the tool holder raises the height, the vegetable may even have a knife. If the tool holder lifts too high, it may cut the conveyor belt.

The cutting machine USES half moon knife plate and half moon adjustment plate structure, does not need to replace the blade, just use different hopper, and plate moving backward switch can be done cutting silk or slicing work.